Motorcycle protection

Protective arches Honda CBR1000RR arches. Powder coating. Fasteners included. Under the order 7-14 days...

Arcs Honda CBR250R. Pipe thickness 1.5 mm. Powder coating. Mounts for installation included. Dispatch within 3-5 days...

Bars for Honda CBR300R. Pipe thickness 1.5 mm. Powder coating. Mounts for installation included. Dispatch within 3-5 days...

Bars for Honda CRF1000i. For manual transmission and DCT (when placing an order, specify the choice in the comments).They consist of two parts: upper (1) and lower (2). You can choose separately or together. Pipe thickness 1.5 mm. Powder coating. Mou..

Protective arches on the motorcycle HONDA Crossrunner 800 are designed to prevent the most vulnerable parts of the motorcycle - crankcase and the lower side of the motorcycle at speeds up to 150 km / h, as well as minimize damage to the plastic fairi..

Protective arches Honda Deavilie 650. Powder coating. Fasteners included. Under the order 7-14 days...

Arcs HONDA NC700X AUTOMAT Material - steel pipe with a diameter of 22 mm, wall thickness 2 mm, plates 5 mm thick, powder coating, fasteners included..

Bars for Honda NC700X NC750X 2011-2020 (Manual box). Pipe thickness 1.5 mm. Powder coating. Mounts for installation included. Dispatch within 3-5 days...

Arcs for Honda NX 250 Dominator. Pipe thickness 1.5 mm. Powder coating. Mounts for installation included. Dispatch within 3-5 days...

Bars for Honda NX650 Dominator RD08. Pipe thickness 1.5 mm. Powder coating. Mounts for installation included. Dispatch within 3-5 days...

Arcs for Honda Rebel 500. Pipe thickness 1.5 mm. Powder coating. Mounts for installation included. Dispatch within 3-5 days...

Protective arches are designed to prevent the most vulnerable parts of the motorcycle HONDA TransAlp XLV 400-600 - crankcase and the lower side of the motorcycle at speeds up to 150 km / h, as well as to minimize damage to the plastic fairing when sl..

Protective arches (English Crash guards or Crash cages) are designed to protect the most vulnerable parts of the motorcycle in the event of a fall - the engine cover and footrests, as well as to minimize damage to the plastic fairing to minimize the ..

HONDA TransAlp xl700 arches have a reliable design and are attached to the motorcycle at three points on each side. The design and choice of material for the arches of the motorcycle is developed individually for each model and depends on the weight,..

Protective arches are designed to prevent the most vulnerable parts of the motorcycle HONDA VARADERO 1000 carburetor - crankcase and the lower side of the motorcycle at speeds up to 150 km / h, as well as to reduce damage to the plastic fairing to a ..

Protective arches of HONDA VFR 800 (ver.1) Pipe thickness 2 mm. Powder coating. Fasteners for installation included. Shipping within 10-14 days...

Honda VFR 800 arches with sliders. Material pipe diameter 22 mm, wall thickness 2 mm, plate thickness 5 mm. Fasteners included. Powder coating...

Bars for Honda VFR1200X Crosstourer. Pipe thickness 1.5 mm. Powder coating. Mounts for installation included. Dispatch within 3-5 days...

DCT bars for Honda VFR1200X Crosstourer. Pipe thickness 1.5 mm. Powder coating. Mounts for installation included. Dispatch within 3-5 days...

Arcs for Honda VRX400. Pipe thickness 1.5 mm. Powder coating. Mounts for installation included. Dispatch within 3-5 days...

Bars for Honda VTR 250. Pipe thickness 1.5 mm. Powder coating. Mounts for installation included. Dispatch within 3-5 days...

Protective arches Honda XL 650 Transalp with a partition. Under the order 7-14 days. Powder coating. Fasteners included...

Roll bars for Honda XL650V Transalp.Pipe thickness 1.5 mm.Powder coating. Mounts for installation included.Dispatch within 3-5 days...

Bars for Honda XR125-150.   Material - steel pipe with a diameter of 22 mm, wall thickness 2 mm, plates 5 mm thick, powder coating, fasteners included. Manufacturing within 10-14 days...