Styling and Tuning

Steering wheels for cafe racers available! In chrome and black and glossy color. Dimensions: total length 76 cm, length in the center 32 cm, length of handles 26 cm, height 11 cm. The steering wheel diameter is 22 mm. Material: steel, 3 mm...

Clutch and brake triggers for KawasakiZX6R 636 Ninja 2007-2017ZX10R Ninja 2006-2015Z750R 2011-2012Z1000 2007-2016Z1000SX Ninja 1000 2011-2016Material - polished aluminum..

Direct flow WR "S. Included: muffler, clamp, flute, eraser, flange, gasket, damper. Material: aluminum. Overall length: 54 cm. Body length: 45 cm. Width 10 cm. Pipe diameter at the inlet and outlet: 5 cm...

Direct flow YOSHIMURA carbon. Inside a mesh with glass, which make the sound so juicy! Included: muffler, clamp, rubber band and damper. Material: aluminum. Overall length: 55 cm. Body length: 45 cm. Width 10 cm. Pipe diameter at the inlet and outlet..

Corners for Yamaha YZF R1 R6 R6S and other sportbikes. LED. Very bright. Length 5.5 cm, width 3.9 cm, height 2.1 cm. Mounting stickers included..

Protective arches are designed to prevent the most vulnerable parts of the motorcycle kawasaki ninja 300 - crankcase and the lower side of the motorcycle at speeds up to 150 km / h, as well as to minimize damage to the plastic fairing when minimizing..

Crashpads are universal, portable. For streets, sports and road workers of various brands of motorcycles including Honda CB400, CB-1, VTR, etc. Metal sleeve, plastic working part...

Crashpeds are universal, portable.For street, sports and road builders of different brands of motorcycles including Honda CB400 CB600F and others.The bushing and body are metal, the working part is polymer.Overall length 11 cm.Bolt for mounting M10.T..

Cruise control is used to reduce wrist and hand fatigue during long trips. Easy to install and remove, easily adjustable gas. Suitable for all types of motorcycles and scooters with a steering wheel of 22 mm...

Driver's footrests on a chopper. Made of chromium-plated aluminum alloy. Rubber inserts do not allow your feet to slip when traveling. Adjust the angle with a bolt at the end of the footrest...

Cylinder for hydraulic clutch. Metal. Complete with fitting. The total length with an elongated rod is 15.5 cm. The cylinder is 5 cm long and 1.8 cm wide...

Double-2 turns. Six LEDs on one side and three on the other. Material - plastic. Dimensions 8 * 2 * 1.7 cm...

Chopper steering wheel. It is possible to establish on a street, for the lowered arrangement of handles. Width 80 cm. Height 13 cm. 22 and 25 mm. In chrome (silver). Metal 3 mm...

Drag Star mirrors. Rectangular mirrors for choppers, road workers and roadsters. Metal leg, plastic body. Sewer mirrors for Honda Stead, Yamaha Virago, Drag Star , etc. The size of a mirror is 13,5х8 cm. A leg with a carving of 10 mm...

Drop Black Led turns. Material plastic + rubber. LED. The size of turn is 7 x 4,5 cm. Length of a leg is 6,5 cm. Thread of a bolt on 12 mm. Tinted glass makes this model very attractive. Will be a great addition to a chopper, cruiser or classic...

Drop Black turns. Material plastic + rubber. Inside the lamp is 12 V. The size of turn is 7 x 4,5 cm. Length of a leg is 6,5 cm. Thread of a bolt on 12 mm. Tinted glass makes this model very attractive. Will be a great addition to a chopper, cruiser ..

E-MARK turns. LED. With yellow glass. With a short rubber leg. Length 9 cm, Width 3 cm, Height 2 cm...

Lighthouse cafe-bober 2. Metal. Chrome. Reflector-glass. H4 base, Philips lamp inside. Housing diameter 12 cm, optics diameter - 10 cm, depth 9 cm, mounting length 5 cm, lug width 17 mm. Near-far light...

All metal. Reflector glass. Inside two halogen lamps of 35 watts. Diameter of a headlight is 9 cm. Width on fastenings is 20 cm. Holes on the sides with a diameter of 8 mm...

Mounting with the owner of the camera, video recorder for a motorcycle or car. This assistant consists of a bracket and tightens the nuts, which is pushed apart by 15-30 mm. The presence of adjustments will help to set your device in the right angle...

Fastening for a headlight on the Custom-2 motorcycle. Adjustable for the angle of rotation. The total length is 17 cm. The length of the working part is 10 cm. Width 6 cm. The distance between the holes is 10 cm. For feathers with a diameter of 41-43..

Fastening of turns Back. Made of metal. Width 1.5 cm. Length 7 cm. The diameter of the hole is 10 mm. The size of the cutout is 1.3 x 2 cm. The price is for a couple...

Fastening of turns-mirrors on a wheel. Metal. In chrome and black. Diameter is 25 mm. Possibility of installation on a wheel of 22 mm due to substrates. Diameter of an aperture for fastening of 10,5 mm..

Under the steering wheel diameter of 25 mm. All metal. With engraving in the form of tongues of flame. With an insert under two gas cables. A great option for restoring a chopper or other class of motorcycle...